Complete Engine-Management System
Electronically controlled monitoring system protects the engine components from over-revving, low engine-oil pressure and overheating. |
Regulated Charging System
A high-quality regulator/rectifier is standard on all models to prevent overcharging the battery. |
Fresh Water Flushport
Allows easy hook-up to fresh water supply to flush debris and salt water out of the engine, extending the life of the outboard (optional Flush Kit required). |
Shallow-Water Drive
Allows you to run in shallow water with the engine raised to reduce the risk of damage to the lower gearcase. |
Ultra Low 3-Star CARB Emissions
Environmentally conscious technology. All Honda Marine engines exceed the highest CARB 3-Star rating to meet the rigorous California Air Resource Board's standards. |
Three-Year Warranty
The best outboards are backed by the best warranty, 3 years parts and labour. |
Convenience and Ease of Use
|
Auto-Choke System
An automatically controlled start-up fuel-enrichment system ensures optimum air-fuel ratio to the engine, eliminating the chores of choke operation and greatly simplifying engine start-up (electric-start models). |
Lightweight, Rounded Design
Easy to transport, ideal for 12-16 ft. fishing boats, inflatables and pontoon boats especially, with remote-control power-tilt models available. Rounded ergonomics won't catch fishing lines as easily. |
High-Output Charging System
All electric-start models are fitted with a high-output charging system that will deliver an amazing 12 amps at only 3,000 rpm to keep your electronics working and batteries charged. |
Easy-Pull Starting
The programmed-ignition system sets the ignition system during start-up to reduce the effort required to pull start the engine. |
Forward-Mounted Shift Lever
Allows more control and comfort in shifting. |
Quick-Twist Throttle Friction Adjuster
A simple twist of the throttle friction collar located right at the throttle grip allows you to adjust the throttle tension up or down, minimizing driver fatigue. |
Front-Mounted Steering-Friction Adjuster
A new quick-adjust lever design located just above the transom bracket allows for precise adjustments at your fingertips. |
Integrated Carrying Handle
A convenient, foldaway carry handle is situated at the exact horizontal balance point of the engine so that the engine carries more easily in a level position. |
Gas-Assist Tilt Model (LHGC model)
A model is available with high-pressure gas-assist strut that greatly reduces the effort required to raise the lower gearcase out of the water. The motor can be locked in any position with the simple flip of a lever and – when locked – up to 50% throttle may be applied within a specified range. |
Power Tilt (LRTC model)
An electrically powered hydraulic lift system to raise and lower the motor in and out of the water at the touch of a button, either at the motor or from a remote location. Some optional parts may be required. |
Long Tiller Handle
The BF20 tiller models use a long tiller handle for increased control and reduced steering effort. The tiller handle is also made of lightweight composite for increased strength and weight reduction. |
Standard Fuel Tank, Hose and Propeller
A 12-litre fuel tank, fuel hose and aluminum propeller are included as standard equipment. |